Error 110B8

Posted about 2 months ago by Kaleb Eichberger

Post a topic
Answered
K
Kaleb Eichberger

I am trying to put custom tuning on my 2021 F-350 and my X4 tuner comes up with the 110B8. The vbatt reads anywhere from 12.1 - 13.5 and I have a battery charger on it but it still flashes that error. I also updated the X4 device but that hasn't helped. I don't think it is communicating with the pickup because it never pulls my VIN onto the tuner.

0 Votes

L

Leo Stapleton posted about 2 months ago Admin Best Answer

https://derivepower.freshdesk.com/a/solutions/articles/72000573687 here is a link for the troubleshooting for that 110b8 code, also you are connected under hood as the instructions are advising? I will attach the instructions just in case you need them as well. If all of this checks out you will need to contact our support department through the chat bubble at the bottom right of our website, or open up a ticket via the support portal on our website (https://derivepower.freshdesk.com/support/home)!

0 Votes


2 Comments

Sorted by
K

Kaleb Eichberger posted about 2 months ago

Thank you for the instructions. I did not have those previously. I was able to successfully tune my F-350 with the custom tunes by connecting the X4 under the hood. Thanks for the help!

0 Votes

L

Leo Stapleton posted about 2 months ago Admin Answer

https://derivepower.freshdesk.com/a/solutions/articles/72000573687 here is a link for the troubleshooting for that 110b8 code, also you are connected under hood as the instructions are advising? I will attach the instructions just in case you need them as well. If all of this checks out you will need to contact our support department through the chat bubble at the bottom right of our website, or open up a ticket via the support portal on our website (https://derivepower.freshdesk.com/support/home)!

0 Votes

Login or Sign up to post a comment