001.“Error configuring memory. Please contact technical support.
002.”Memory addressing error. Please record these numbers and contact technical support.
003.“Truck file exceeds allowable file length. Please contact technical support.
004.”File exceeds allowable length. Please contact technical support.
005.“File Corrupt on SD card. Please update files or contact tech support at www.bullydogbigrig.com
006.”Software update needed. Please contact tech support at www.bullydogbigrig.com
007.“Sensor Dock Temperature gauge error. Calibrated values are not supported. Please contact tech support with gauge information”
008.“File not found on SD card. Please update files using the Update Agent or contact tech support
009.”Device does not have the memory necessary to complete the requested download. Please contact tech support
010.“Tuning is not available for this vehicle or device requires an update. Please update GT or contact tech support
011.”The tuning file is not up to date. Please update GT or contact tech support
012.“Tuning file is corrupt. Update unit and try again. If problem continues contact technical support.
013.”New file found! Please connect to Heavy Duty Update Agent for Updated Tuning. If issue persists contact technical support.
014.“Tuning error. Update unit and try again. If problem continues contact technical support.
015.”Tuning Error, too many strings. Update unit and try again. If problem continues contact technical support.
016.“Tuning Error, too many maps. Update unit and try again. If problem continues contact technical support.
017.”Tuning Error, String size to large. Number of parts incorrect. Try again, if problem continues contact technical
018.“Tuning Error, unknown replacement type. Update unit and try again. If problem continues contact technical support.
019.”Tuning Error, map data not found. Update unit and try again. If problem continues contact technical support.
020.“Error Tuning file. Update unit and try again. If problem continues contact technical support.
021.”Tuning Error, Buffer overflow. Update unit and try again. If problem continues contact technical support.
022.“Tuning Error, unknown replacement type. Update unit and try again. If problem continues contact technical support.
023.”Tuning Error. Incorrect number of maps found. Update unit, then try again. If problem continues contact technical support.
035.“File is incorrect. This file is for a different vehicle. Verify correct vehicle and try again. If problem continues contact technical support.
050.”Currently using all available downloads. Please contact your Dealer to purchase more downloads.“
051.”Unable to return to stock. Please contact technical support.“
052.”Database file not compatible.“
053.”Vehicle was not identified correctly. Verify connections and the Key is in the RUN/ON position.“
059.”Download did not complete successfully. Please try again, if problem continues contact technical support.
060.“Unable to access SD card. Please ensure SD card is properly inserted. Contact technical support if problem continues.
061.”Unable to open file. Please ensure SD card is properly inserted. Contact technical support if problem continues.
062.“Unable to create or change file directory. Please ensure SD card is properly inserted. Contact technical support
070.”It appears the connected vehicle is not compatible with the Medium Duty device. Please contact technical support“
099.”Information Only“
CAT
100.”Connect to Truck Failed! Unplug device, cycle key and try again. If error continues contact technical support
101.“Error Unlocking ECM. Unplug device, cycle key and try again, if error continues contact technical support.
102.”Error Unlocking ECM BASE. Unplug device, cycle key and try again, if error continues contact technical support.
103.“CAT file exceeds allowable file length. Please contact technical support.
104.”Connect to Truck Failed! Unplug device, cycle key and try again. If error continues contact technical support
105.“Connect to ECM Failed! Unplug device, cycle key and try again. If error continues contact technical support
109.”Cat tuning file is incorrect. Update unit and try again. If problem continues contact technical support.
110.“Cat tuning file is corrupt. Update unit and try again. If problem continues contact technical support.
113.”CAN Communication Lost! Unplug device, cycle key and retry download. If problem continues contact technical support.
114.“CAN Communication Lost! Unplug device, cycle key and retry download. If problem continues contact technical support.
115.”Download Error! Unplug device, cycle key and retry download. If problem continues contact technical support.
116.“Download Error, too many retry attempts. If problem continues contact technical support.
121.”File checksum verify failed. Update Device with Heavy Duty Update Agent, if problem continues contact technical support with this info.
122.“Downloading checksum fail. Unplug, cyce key, and try again, if problem continues contact technical support with this info.
132.”This device is locked to a different vehicle. Verify correct vehicle, cycle key, and try again. If problem continues contact technical support.
134.“This device is locked to a different vehicle. Verify correct vehicle and try again. If problem continues contact technical support.
140.”Unable to acquire correct data. Unplug device, cycle key and try again. If problem continues contact technical support.
CUMMINS
200.“Unknown PCM State. Unplug device, cycle key and try again. If problem continues contact technical support.
201.”PCM State record only.“
202.”Unable to read calibration data. Unplug device, cycle key and try again. If problem continues contact technical support.
203.“Downloading error. Please contact tech Support with this information
204.”Unable to read file data. Unplug device, cycle key and try again. If problem continues contact technical support.
205.“Unable to read vehicle data. Cycle key and try again. Verify vehicle application. If problem continues contact technical support.
206.”Security Error. Unplug device, cycle key and try again. If problem continues contact technical support.
207.“Unable to request data. Verify correct vehicle. Unplug device, cycle key and try again. If problem continues contact technical support.
208.”Error in communication. Unplug device, cycle key and try again. If problem continues contact technical support
209.“Error in communication. Verify the device connections and key is in the RUN position. If problem continues contact technical support.
210.”Special Feature data is not valid. Try again, if problem continues contact technical support with this info.
220.“Stock file checksum verify failed. Try again, if problem continues contact technical support with this info.
221.”Tune file checksum verify failed. Try again, if problem continues contact technical support with this info.
222.“Calibration verification failed from ECM.”
223.“Calibration verification failed on Device.”
224.“Read size error.”
225.“Error in file section being checked, it is not in the file read.”
226.“Section being checked is not in read file.”
227.“Unable to continue until trip info is corrected. Please contact technical support.
228.”Previous read address not found. Try again, if problem continues contact technical support.
229.“Reading Error. Try again, if problem continues contact technical support.
230.”Security Error. Value is not correct. Cycle key and try again. If problem continues contact technical support.
231.“File is incorrect. Previous read found from different file. Verify correct vehicle and try again. If problem continues contact technical support.
232.”Truck file is incorrect. This device has a different stock file. Verify correct vehicle and try again. If problem continues contact technical support.
233.“Updated Flash has been found. If problem continues contact technical support.
234.”This device is locked to a different vehicle. Verify correct vehicle and try again.
235.“Truck is incorrect. This device is locked to a different vehicle. Verify correct vehicle and try again. If problem continues contact technical support.
236.”Software is incorrect. This device is locked to a different vehicle. Verify correct vehicle and try again. If problem continues contact technical support.
237.“No response from ecm for entry. Cycle key and try again. If problem continues contact technical support.
240.”Write to ECM Rejected. Verify ECM password in Vehicle Settings menu. Unplug device, cycle key and try again. If problem continues contact technical support.
241.“Buffer Overflow sending parameter. Unplug device, cycle key and try again. If problem continues contact technical support.
242.”Error writing parameter. Unplug device, cycle key and try again. If problem continues contact technical support.
243.“Error setting parameter length. Unplug device, cycle key and try again. If problem continues contact technical support.
244.”Error erasing ECM. Unplug device, cycle key and try again. If problem continues contact technical support.
245.“Confusing write size. If problem continues contact technical support.
246.”Data packet too large during write. If problem continues contact technical support.
247.“Parameter write error. Timeout during write. If problem continues contact technical support.
248.”Problems resetting ECM. If problem continues contact technical support.
249.“Error in download packet. If problem continues contact technical support.
252.”Checksum mismatch. Try again, if problem continues contact technical support.
253.“Checksum data invalid. Try again, if problem continues contact technical support.
270.”Invalid file or no file loaded. Please contact technical support.
280.“Reading Calibration Error. Try again, if problem continues contact technical support.
281.”Calibration size error. Try again, if problem continues contact technical support.
282.“Unable to find calibration data. Please contact technical support.
283.”Unable to find file calibration. Please contact technical support.
DETROIT
300.“Vehicle Password is Invalid. Verify recovery information from Tech Support.
301.”No config data exists. Please contact tech Support with this information at
302.“Unknown ECM type. Try again, if problem continues contact technical support.
303.”No stock file. Please contact tech Support with this information
304.“Unable to read file data. Unplug device, cycle key and try again. If problem continues contact technical support.
306.”Security Error. Password may be incorrect. Verify password, unplug device, cycle key, and try again. If problem continues contact technical support.
307.“Security Error. Unplug device, cycle key, and try again. If problem continues contact technical support.
309.”Unable to verify vehicle. Please check connections, verify key is in the ON position and try again. If problem continues contact technical support.
310.“Unable to connect. Please check connections, verify key is in the ON position and then try again. If problem continues contact technical support.
311.”Special Feature data is not valid. Please verify application and try again. If problem continues contact technical support with this info.
320.“Stock file checksum verify failed. Try again, if problem continues contact technical support with this info.
321.”Tune file checksum verify failed. Try again, if problem continues contact technical support with this info.
322.“Checksum file error. Try again, if problem continues contact technical support with this info.
323.”CRC error. Try again, if problem continues contact technical support with this info.
324.“Checksum error. Try again, if problem continues contact technical support with this info.
325.”Problem configuring MCM. Try again, if problem continues contact technical support with this info.
326.“Transfer was aborted. Try again, if problem continues contact technical support with this info.
331.”Updated flash found! Unplug device, cycle key and retry download. If problem continues contact technical support.
334.“This device is locked to a different vehicle. Verify correct vehicle and try again. If problem continues contact technical support.
340.”Communication packet error. Try again, if problem continues contact technical support with this info.
341.“Data not accepted. Try again, if problem continues contact technical support with this info.
342.”Parameter not accepted. Try again, if problem continues contact technical support with this info.
350.“Error in checksum of file. Try again, if problem continues contact technical support with this info.
351.”Error in checksum of file. Try again, if problem continues contact technical support with this info.
PACCAR
403.“No stock file. Please contact tech support with this information
420.”Stock file checksum verify failed. Try again, if problem continues contact technical support with this info.
422.“Checksum file error. Try again, if problem continues contact technical support with this info.
434.”This device is locked to a different vehicle. Verify correct vehicle and try again. If problem continues contact technical support.
435.“Truck is incorrect. This device is locked to a different vehicle. Verify correct vehicle and try again. If problem continues contact technical support.